ngoam:PingNve
Ping Nve
Telemetry Sensor Path(s)
Configurable Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
---|---|---|---|
adminSt | action:AdminSt (scalar:Enum8) |
The administrative state of the object or policy. | SELECTION: 0 - unknown 1 - start 2 - stop 3 - suspend DEFAULT: unknown |
count | ngoam:NumPkt (scalar:Uint16) |
Number of packets | RANGE: [1 , 0xffff] DEFAULT: 5 |
dataPattern | ngoam:PayloadPad (scalar:Uint16) |
data pattern | RANGE: [0 , 0xffff] DEFAULT: 0 |
descr | action:Descr (naming:Descr) |
Description | RANGE: [0 , 128] |
dot1q | ngoam:Dot1q (scalar:Uint16) |
dot1q | RANGE: [0 , 4096] |
dstIp | address:IPv4 |
Destination Node ID | Value must match ipv4 format |
dstIpv6 | address:IPv6 |
Destination Node ID | Value must match ipv6 format |
dstMAC | address:MAC |
Destination Node ID | Value must match MM:MM:MM:SS:SS:SS format |
dstSid | address:IPv6 |
Destination Segment Identifier (SID) for SRv6 | Value must match ipv6 format |
egressIf | nw:IfId (base:IfIndex) |
Interface ID | Must match first field in the output of show intf brief . Example: Eth1/1 or Vlan100 |
endOp | address:IPv6 |
Override End.OP value for SRv6 | Value must match ipv6 format |
endOtp | address:IPv6 |
Override End.OTP value for SRv6 | Value must match ipv6 format |
freq | action:Freq (scalar:Time) |
Frequency at which tasks are executed | SELECTION: 0 - one-shot |
interval | ngoam:SendIntvl (scalar:UByte) |
Interval | RANGE: [0 , 25] DEFAULT: 0 |
macsrcif | nw:IfId (base:IfIndex) |
payload source interface | Must match first field in the output of show intf brief . Example: Eth1/1 or Vlan100 |
noPot | scalar:Bool |
No proof of transit required for SRv6 pings | SELECTION: true or false |
noReducedSRH | scalar:Bool |
Preserve the entire SID list in the SRH | SELECTION: true or false |
packetSz | ngoam:PktSz (scalar:Uint16) |
Payload Size | RANGE: [1 , 9500] DEFAULT: 56 |
payload_dot1q | ngoam:Dot1q (scalar:Uint16) |
dot1q | RANGE: [0 , 4096] |
payload_dstip | address:IPv4 |
dst IP v4 address | Value must match ipv4 format |
payload_dstipv6 | address:IPv6 |
dst IP v6 address | Value must match ipv6 format |
payload_dstmac | address:MAC |
dst mac address | Value must match MM:MM:MM:SS:SS:SS format |
payload_dstport | scalar:Uint16 |
payload dst port | RANGE: [0, 65535] |
payload_protocol | ngoam:Protocol (scalar:Uint16) |
payload protocol | RANGE: [0 , 255] |
payload_srcif | nw:IfId (base:IfIndex) |
payload source interface | Must match first field in the output of show intf brief . Example: Eth1/1 or Vlan100 |
payload_srcip | address:IPv4 |
src IP v4 address | Value must match ipv4 format |
payload_srcipv6 | address:IPv6 |
src IP v6 address | Value must match ipv6 format |
payload_srcmac | address:MAC |
src mac address | Value must match MM:MM:MM:SS:SS:SS format |
payload_srcport | scalar:Uint16 |
payload src port | RANGE: [0, 65535] |
profileId | ngoam:ProfId (scalar:Uint16) |
Ngoam profile ID | RANGE: [1 , 1023] |
session | string:Basic |
session | A sequence of characters |
sessionId | scalar:Uint32 |
session ID | RANGE: [0, 4294967295] |
sidList | string:Basic |
SID list : String of v6 Segment Identifiers (SIDs) seperated by space | A sequence of characters |
srcIp | address:IPv4 |
Source IP | Value must match ipv4 format |
srcIpv6 | address:IPv6 |
Source IP | Value must match ipv6 format |
srcPort | ngoam:Sport (string:Basic) |
Source Port | A sequence of characters DEFAULT: 0 |
sweepmax | ngoam:SweepSz (scalar:Uint16) |
Sweep End of Range | RANGE: [90 , 9600] DEFAULT: 90 |
sweepmin | ngoam:SweepSz (scalar:Uint16) |
Sweep Start of Range | RANGE: [90 , 9600] DEFAULT: 90 |
timeout | ngoam:Timeout (scalar:UByte) |
Timeout | RANGE: [0 , 25] DEFAULT: 2 |
type | action:Type (scalar:Enum8) |
The specific type of the object or component. | SELECTION: 1 - clear 2 - reset 3 - reload 4 - locate 5 - install 6 - test 7 - collect 8 - interface-in-service DEFAULT: clear |
verifyHost | scalar:Bool |
Verify Host | SELECTION: true or false |
vni | ngoam:Vnid (scalar:Uint32) |
VNI | RANGE: [1 , 16777215] |
vrf | ngoam:Vrf (l3:VrfName) |
VRF |
Operational Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
operSt | action:OperSt (scalar:Enum8) |
Completion | SELECTION: 0 - scheduled 1 - processing 2 - completed 3 - cancelled 4 - failed 5 - indeterminate 6 - suspended 7 - crashsuspect DEFAULT: scheduled |
Internal Properties
PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
---|---|---|---|
modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
peerClassId | mo:MoClassId |
The BGP neighbor. | |
rSz | action:RetentionSize (scalar:Uint16) |
The retention size of the task results. | RANGE: [1 , 1024] DEFAULT: 100 |
rTm | action:RetentionTime (scalar:Time) |
The retention time of the task results. | TIME FORMAT: %H:%M:%S 54:05:07:26.000 |
startTs | mo:TStamp (scalar:Date) |
The date and time when the task began. | SELECTION: 0 - never DEFAULT: never |
status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |